⚠ 24-Hour Emergency Well Pump Service — Call (541) 935-7867 anytime
Coastal Range Water Inc. logo

Blog

What Should I Test My Private Well Water For?

Andy Cobb · Apr 25, 2026

What Should I Test My Private Well Water For?

For Oregon private wells, the Oregon Health Authority recommends annual testing for coliform and E. coli bacteria and nitrate, plus arsenic testing every three to five years. Additional testing depends on your property, water history, and possible sources of contamination.

Explore Coastal Range Water’s water treatment services for your Lane County home.

Where should I begin?

Use an accredited laboratory and request the appropriate collection kit. Follow its instructions for sampling location, containers, preservation, and delivery deadlines. Ask whether samples should represent untreated source water, treated drinking water, or both. A sample collected at the wrong point can answer the wrong question.

When might more testing be needed?

Discuss a history of contamination, septic problems, equipment failures, flooding, or changes in taste, odor, or appearance with the laboratory or local health department. Those details may call for earlier or additional tests. For equipment selection, hardness, iron, manganese, pH, and other chemistry measurements may also be useful.

How do I read the report?

Check the sample date and location, analyte name, result, units, and reporting limit. Milligrams per liter and micrograms per liter differ by a factor of 1,000. A nondetect means the substance was not measured above the method’s reporting limit; it does not mean every contaminant is absent. Ask the laboratory or health department to explain health-related findings.

How do results guide treatment?

Match treatment to the identified contaminant and concentration. A sediment filter, softener, disinfection unit, and reverse-osmosis device perform different functions. Ask about verified reduction claims, required pretreatment, rated flow, maintenance, and follow-up sampling. Treating one problem does not prove the entire supply is safe.

What if a result is concerning?

Obtain prompt guidance from the laboratory or health department about drinking and cooking use and corrective steps. Do not assume boiling resolves chemical contamination. Keep reports together so trends and treatment performance can be reviewed. After corrective work, arrange the recommended verification sampling before relying on the treatment.

Reference: Oregon Health Authority testing recommendations.

Arrange service in Lane County

Discuss your symptoms and records with Coastal Range Water. For water treatment evaluation, call 541-935-7867 and ask about the next available appointment.